10" color touchscreen: 1805 & 1886 series
Modern digital technology for safety-current-limited applications or those at 500 VA / 200 mA.
Type of device
Desktop device 14" / 3 HU
High voltage AC: Voltage range
100 – 5,500 V
High voltage AC: Current range
0 – 3 mA
High voltage DC: Voltage range
100 – 6,000 V
High voltage DC: Current range
0 – 10 mA
Insulation DC: Voltage range
100 – 6,000 V
Insulation DC: Measuring range
250 kΩ – 1 GΩ
10 – 30 A / 0 – 0.4 Ω
With the only 14” / 3 HU sized, but extremely powerful S 1800M you get a combination between our bestseller, the high voltage tester HA 1800M and our popular ground bond tester P 1800D. Due to the integrated safety current limitation at AC and DC voltage, it is possible to test according to the respective safety standards without any additional protection.
The newest electrical safety analyzer developed by SPS electronic combines hipot-, insulation-, and ground bond tests in one device and therefore the various testing requirements you might need for your electric products.
The S 1800M provides maximum comfort and ease of use through the 4.3" TFT color display built-in by default. Individual tests can easily be carried out, or a fully automatic test plan can also be created using the customizable test programs. The DUT must therefore be connected only once – time-consuming replugging is a matter of the past!
The hipot analyzer S 1800M features a fully electronic generator, which provides more accurate and faster testing. The device is also independent of the mains supply. Be it 120V / 60Hz in the US or 220 V / 50 Hz in China – the hipot safety analyzer S 1800M can readily be used anywhere in the world!
With the help of our convenient PC software, the device can not only be controlled remotely, but it can also be extended by additional features and test steps. The test results can then be stored on a USB flash pen drive and thus, easily documented.
With a compact, convenient housing, S 1800M is ideally suited for portable application. Thanks to the safety current limitation according to EN 50191, no additional protective measures (such as a test cover or two-handed operation) are necessary for the operation.