10'' touch color display: 1805 & 1886 series
Modern, digital technology for applications with 500 VA / 200 mA or safety current limited.
|Kelvin Terminal KL25||Battery Terminal KL01|
The name "Kelvin" describes the used 4-wire technology: the test signal and the measurement signal (sensor line) are transmitted separately to the DUT. Low impedance measurements are possible only with this technique. The Kelvin terminals are used if connections such as threaded bolts or free cable ends must be contacted. The Kelvin terminals are also used in ground bond tests: Low impedance cables are measured here with the ground bond tester.
The Kelvin terminals of SPS electronic are of high quality and available in different versions. The exchangeable clamping jaws allow connection of free cable ends as well as threaded bolts.
|Pressing force||100 N||100 N||100 N|
|Contact area||20 mm² (0.03 in.²)||20 mm² (0.03 in.²)||20 mm² (0.03 in.²)|
|Connection cable||available separately||appx. 1.5 m (4.9 ft.) long with 4 mm (0.16 in.) laboratory plugs|
|Opening width||30 mm (1.1 in.)||15 mm (0.6 in.)||35 mm (1.4 in.)|
|Jaws||for free cable ends: from 0.5 to 30 mm Ø (0.02 to 1.2 in.) | for threaded bolts: from 2 to 5 mm Ø (0.08 to 0.19 in.)|
|Material||made of black plastic||made of black plastic||made of black plastic|
|Buy now||Buy now||Buy now|
The high-quality battery terminal from SPS electronic is made of yellow galvanised sheet steel and insulated with PVC grips. It can be loaded up to 80A and has a contact area of 10 mm²(0.015 in.²).
|Rated current||80 A|
|Contact area||10 mm² (0.015 in.²)|
|Connection||can be crimped on or screwed on (ring eyelet M4) | with strain relief|
|Opening width||20 mm (0.8 in.)|
|Length||125 mm (4.92 in.)|
|Material||made of yellow galvanised sheet steel | with PVC grips|