10" color touchscreen: 1805 & 1886 series
Modern digital technology for safety-current-limited applications or those at 500 VA / 200 mA.
With the ground bond tester P 1800D, standardized ground bond tests and continuity tests can be performed on devices of protection class I. So you can reliably and flexibly check whether the permissible limits in the standards of the ground bond resistance are not be exceeded.
Type of device
Desktop 14“ / 3 HU
10 – 30 A / 0 – 400 mΩ
24 V DC / 0 - 600 mA
The ground bond tester P 1800D is not only convenient and compact, but is also the latest innovation in the field of ground bond testing. It is ideal for easy, inexpensive and sophisticated ground bond tests by current national and international standards (IEC, EN, UL, VDE etc.)
P 1800D provides maximum comfort and ease of use through the 4.3" TFT color display built-in by default. The ground bond test can take place from 10 - 30 A AC in the precise 4-wire technology, and no elaborate protective measures are required for the testing personnel due to the protective low voltage of 6 V AC or 12 V DC.
P 1800D has fully electronic AC power source to generate the high test current. The device is also independent of the mains supply. Be it 120 V / 60 Hz in the US or 220 V / 50 Hz in China - the P 1800D can readily be used anywhere in the world!
With the help of our comfortable PC software, P 1800D can not only be controlled remotely, but it can also be extended by additional features and test steps. The test results can then be stored on a USB flash pen drive and thus, easily documented.
With a compact, convenient housing, P 1800D is ideally suited for portable application. Thanks to the numerous interfaces, you will be spoiled for choice in terms of the control: be it via USB, Ethernet / LAN, RS 232 or 24 V interface - the P 1800D adapts to you and not vice versa!
Do you need suitable accessories?
You will find our wide range of accessories here