10" color touchscreen: 1805 & 1886 series
Modern digital technology for safety-current-limited applications or those at 500 VA / 200 mA.
Electrical brakes and connector sockets are essential components for automation technology. Particularly high requirements are made in the medical field on surgical robots.
Industry: electrical industry
Electrical brakes and connector sockets with torque up to 400 Nm are to be function-tested. As the brakes are also in part used in surgical robots with several arms lying one behind the other, these must hold the position very precisely. Therefore the requirement for the angular resolution is very high especially in the static test.
The following parameters must be acquired:
To ensure a flexible DUT pick-up, with which all possible designs and sizes can be picked up, two 4-jaw chucks have been used. Depending on the type of DUT the customer can use his own adapters or clamp the DUT directly. The output side can be adjusted with a linear unit. This way the system can be adapted to the width of the DUT. In addition a simple insertion of the DUT is ensured. When testing series the first DUT can be positioned by hand respectively. In the case of further DUT this positioning is carried out automatically and thus very quickly. In addition the air gap can be adjusted fully automatically. Depending on the type of DUT the rotation of the output side can be allowed or blocked. To ensure a high angular resolution rotary encoders with 19 bit resolution (524288 increments) each were used on the drive and on the output side.