10" colour touchscreen: 1805 & 1886 series
Modern digital technology for safety-current-limited applications or those at 500 VA / 200 mA.
The name "Kelvin" describes the used 4-wire technology: the test signal and the measurement signal (sensor line) are transmitted separately to the DUT. Low ohm measurements are only possible with this technology and this is when high voltage kelvin pins are used. The main use of high voltage kelvin pins is however for high voltage tests. With the 4-wire technique the high voltage is carried via a pin and measured back by a second pin. As the test item itself short-circuits the test lead with the measuring lead, it can be 100% guaranteed that the high voltage is applied during the test. SPS electronic’s high voltage kelvin pins are high quality and available with various shaft lengths.
|99 mm||KK 10 - 6 - 9|
|129 mm||KK 10 - 6 - 13|
|176 mm||KK 10 - 6 - 18|