10" colour touchscreen: 1805 & 1886 series
Modern digital technology for safety-current-limited applications or those at 500 VA / 200 mA.
Testing system for stators
Two test stations were required in order to test the stators before and after the impregnating. Two almost identical test stations were setup for this purpose in order to be able to use both stations for both types of tests during peak times. A high level of flexibility was required due to the high diversity of the DUT.
Test system for Pedelec motors
EOL Pedelec motor function test system for E-bikes with complete programming. Among others, there are speedometer, rear and main lights simulated on the motors.
Testing systems for 1-, 2- and 3-phase stators
Following the production of electric motors in the medium power range, the stators are tested for safety and function. A wide range of products, low quantities and highest quality characterize this production. The Product Liability Act requires permanent storage of all test data.
Testing systems for motors 3 x 400 V / 63 A / 50 Hz
Complete testing of electric motors at the end of line. A safety and function test is necessary at the end of line for the 3-phase motors following production.
Stator testing system S 1800
Stators of electric motors must be subjected to an intensive test in production. Only then the stator with the rotor is assembled to an electric motor.
Final testing bench for brushless servomotors
Compact testing system for the final testing of fully assembled motors.