The unique extra – the calibration service from SPS electronic

Because a calibration is not just a calibration, customers worldwide rely on our expertise.

When a "simple" calibration is not sufficient:

DAkkS calibration according to DIN EN ISO / IEC 17025

We are very pleased to have recently received the official accreditation certificate and the certificate for our calibration laboratory in Twist from the DAkkS (German Accreditation Body). This means that we are retroactively authorized to offer accredited calibrations according to DIN EN ISO / IEC 17025 since November 2019 (a competence that only very few laboratories can provide). The final accreditation was preceded by about 5 years of preparation and a lengthy accreditation process - a period of time which, last but not least, makes clear the great importance of this success.

What are the special features of a DAkkS calibration?

DAkkS calibration certificates are valid at any time, internationally and without further valid proof of traceable measurement results. They are issued with standards whose traceability is guaranteed by DAkkS certificates or calibration certificates issued by PTB laboratories. DAkkS calibration certificates can only be issued by the accredited calibration laboratories within the scope of the accredited measured quantities. This ensures that high quality calibration is guaranteed by regular external assessment and re-accreditation, traceable standards, precisely defined environmental conditions and specially trained personnel.

What is the difference between a DAkkS and a traceable factory calibration?

The main difference lies in the evaluation of the measurement results: A factory calibration includes the evaluation of the results without consideration of the measurement uncertainty on the basis of the specifications published in standards, guidelines or by the manufacturer. The DAkkS, on the other hand, provides for an evaluation of results exclusively on the basis of the actual values determined and the associated measurement uncertainties, i.e. all influencing variables occurring during calibration, such as the accuracy of measuring equipment, temperature, type of connection, device-specific parameters, resolution, tolerance limits, etc., are taken into account. The results are evaluated by the customer and the usability for the required measuring process is determined.

Which is the right calibration for me?

The DAkkS calibration according to DIN EN ISO / IEC 17025 becomes necessary if special requirements demand it. This procedure has no influence on the traceability of the measured variables. Both the measured variables of the factory calibration and those of the DAkkS calibration can be represented equally.

Factory calibration certificates are issued with standards that are subject to regular test equipment monitoring; the traceability of the standards used is ensured by regular test equipment monitoring. When recalibrating test equipment, which in turn serve as standards for monitoring other measuring and test equipment, a DAkkS calibration should always be used because of the assured traceability to national standards.

You are not sure which calibration you need?

Contact us - our experts will be happy to provide you with detailed and competent advice: +49 791 20 212 327


Etalonnages: selon les normes nationales et internationales

Nous testons et calibrons vos équipements de tests de sécurité, qu’ils proviennent de SPS electronic ou d’un autre fabricant. Contactez notre Service-Center ou l’interlocuteur de votre pays, SPS electronic est toujours proche de vous!

L'étalonnage annuel des équipements de contrôle est une condition essentielle pour garantir qualité et fiabilité des essais. Il est obligatoire dans le cadre de la maintenance de ces équipements. Nous calibrons vos équipements de contrôle sur site ou dans notre laboratoire. Grâce à notre réseau de partenaires et à nos nombreuses filiales, nous sommes présents dans le monde entier et toujours proche de vous. Afin d’éviter les arrêts de production lors des étalonnages, nous pouvons, à votre demande, vous fournir un appareil de prêt.

Tous les appareils de contrôle qui quittent notre usine sont calibrés selon les normes en vigueur. L’étalonnage est conforme aux normes nationales et internationales et répond également aux exigences de vos audits internes et externes. Un certificat d’étalonnage vous est délivré et vous avez l’assurance d’être en conformité.

Nota: En plus du calibrage régulier, il est impératif de vérifier vos appareils de tests quotidiennement et avant leur mise en marche. Cette vérification est réalisée avec un simulateur de test (Dummy). Vous êtes ainsi assurés du parfait fonctionnement de l’appareil et cela vous permet d’éviter au pire des retours coûteux.

> Vers les simulateurs de test

Vous avez d’autres questions? N’hésitez pas à nous contacter! Nous ne sommes qu’à un appel ou qu’à un mail de vous aider!

 

SPS electronic GmbH

Comment nous joindre

Par courriel, par téléphone ou nous rendre visite.

Vers SPS electronic

Services

Ligne d'assistance téléphonique

Numéro à appeler pour toutes les urgences: +49 791 20 212 327

Vers le Service à la clientèle

Étalonnage

Formulaire de requête

Écrivez-nous, nous vous répondrons sans délais.

Vers le formulaire de requête