Line Leakage Tester AI 5001A

conforms to CE, in accordance with EN 50 191

DUT connection via shock-proof socket or lab sockets

internal / external power supply

voltage increase settable from 100% to 110%

for 1-phase DUTs

digital 24 VDC / PLC and analogue interface

measuring circuit acc. to EN 60 990 fig. 4

The safety test of electrical devices must, after having been tested without current and depending on the relevant test standard, be completed by a line leakage measurement with increased rated voltage. Only by means of the line leakage test is it possible to activate the internal controls in case of electro-mechanical devices.

Series AI 5000 offers 3 different techniques. While tester AI 5000A draws its test voltage directly from the power supply, tester AI 5000P applies a safety isolating transformer.

A further and important feature of the testers is the cutting-in.
With testers AI 5001A, AI 5000P and AI 5010D an operating mode change-over is possible without turning off the supply voltage of the DUT.

Technical data of "AI 5001A"

output (main voltage 230 VAC)
- potential

- phases

230 V - 256 V / 16 A

power supply
1

output (main voltage 115 VAC)

output (external voltage supply)

- potential

- phases
115 V - 128 V / 16 A
60 V - 300 V / 16 A

power supply

1

operating modes A (L/PE) / B (N/PE)

recognition phase yes

measuring range 1 mA / 10 mA

interruption when changing mode of operation no

plug-in 19" / 4 HU

power supply 230 V / 50 Hz or 115 V / 60 Hz

Special features

conforms to CE, in accordance with EN 50 191

optical and audible alarm

analogue measuring instrument for voltage, class 1.5

analogue measuring instrument for current, class 1.5

potential free PLC remote control interface

potential free analogue output for voltage (0 up to 10 VDC)

potential free analogue output for current (0 up to 10 VDC)

built-in adjustable stress increase from 100% up to 110%

feed-in for external testing voltage

Download leaflet line leakage tester PDF-file (approx. 280 KB)

back