High voltage test devices
HA 5012L
With these high voltage testers air and leakage paths are tested. Measurement of test voltages is specified in the relevant standards (IEC, EN, UL, BS, VDE, etc.).
As a general rule applies: rated voltage x 2 + 1000 V
The high voltage tester series HA 5012L has been developed solely for application in automatic test systems.
These devices are remote controlled via a potential free 24 VDC / PLC remote control interface. Current and voltage are supplied via analogue, potential free signals (0 - 10 VDC). Analogue inputs (0 - 10 VDC) are available for rated value defaults.
| Technische Daten | |
| Hochspannungstest - Potential - Sicherheitsstrombegrenzung | 1500 VDC / 4 mA ja |
| Isolationstest - Potential - Sicherheitsstrombegrenzung | 500 VDC / 50 MOhm frei ja |
| Schutzleitertest - Widerstandsmessung (EN 60 335)
- Spannungsmessung (EN 60 204) - Leerlaufspannung | max. 30 AAC bis 20 AAC, max. 500 mOhm 0 - 4 VAC 6 V und 12 V |
| Gehäuse | 14" / 3 HE |
| Netz | 230 V / 50 Hz oder 115 V / 60 Hz |
| Technical data | |
| output AC short-circuit current transformer capacity | 0.2 - 2.5 kV / 100 mA | 0.5 - 5 kV / 50 mA 200 mA 500 VA |
| potential | free |
| 4-wire technique | yes |
| plug-in | 19" / 4 HU |
| power supply | 230 V / 50 Hz or 115 V / 60 Hz |
- conforms to CE, in accordance with EN 50 191
- electronic, wear-proof cutting-in via semi-conductor relay in zero pause
- analogue instrument class 1.5 for voltage
- analogue instrument class 1.5 for current
- secondary measurement of current and voltage
- rear connections for all interfaces
- potential free PLC remote control interface
- analogue programming of release current (0 - 10 VDC)
- potential free analogue output for voltage (0 - 10 VDC)
- potential free analogue output for current (0 - 10 VDC)
- voltage programming (0 - 230 V or 0 - 115 V)
- separate earthing contact
- connection for warning lamp set
Options
-
current range 1 mA / 10 mA
