- high voltage test pistols
- protective wire test probe
- connection box
- test dummy
- PC remote control software
Multi tester
LG 1800B
The compact tester of series LG 1800 combines protective wire, insulation, high voltage, leakage current, function and continuity test in one device allowing tests according to many standards (IEC, EN, UL, VDE, etc.).
This device concept meets all the application requirements for manual operation, automatic protocolling as well as a fully automatic system application. Software packages for remote control support complete concepts and OEM-users.
Special emphasis was placed on optimal operation and readability of the measured values and results. The ergonomics of operation have absolute priority to also enable users without programming knowledge to operate the devices. The USB interface allows storage and standardized protocolling of all parameters and test and measurement results.
The programme memory adapts dynamically to the test requirements.
Via a comfortable WINDOWS-software remote control with a PC is possible.
| Technical data | |
| function test optional voltage supply | 0 - 300 VAC / standard 4 A 2 A / 10 A / 16 A externally 50 / 60 Hz current draw measurement |
| high voltage test DC potential safety current limited ramp function | 100 - 6000 VDC / 4 mA programmable free yes yes |
| high voltage test AC potential safety current limited ramp function | 100 - 5500 VAC / 3 mA programmable free yes yes |
| insulation test potential safety current limited ramp function | 100 - 6000 VDC / max. 20 GOhm programmable free yes yes |
| protective wire test resistance measurement (EN 60 335) no-load voltage | 10 - 30 AAC, max. 400 mOhm 6 V and 12 V |
| continuity test | 24 VDC / 0,6 A |
| equivalent leakage current test 1-phase 1 / 10 mA |
max. 270 V |
| plug-in | ergonomic table device |
| power supply | 90 - 250 V / 50 or 60 Hz |
- conforms to CE, in accordance with EN 50 191
- 7 in 1 tester
- test device combination for safety and function test
- automatic test process
- internal change-over for all tests with single connection of DUT
- time basis 0.1 - 999.9 seconds (dwell time)
- optical and audible alarm
- min/max-limiting value comparator
- micro processor controlled
- internal clock / calendar
- TFT display
- 24 VDC control interface
- PC-remote control interface
Accessories
